ESCI 321 &322 Field Trip: Tales of Mud Volcanoes, Evaporite Deposits and Lava Tubes.


This blog describes the 5-day field trip the Fall 2017 ESCI 321 and 322 classes took to Southern California between October 6 and 10, 2017. The trip was led by professors Dr. Cin-Ty Lee and Dr. Rajdeep Dasgupta as reported by undergraduate students Kendra Baldwin, Kyle Bartsch, Simon Chan, Aitash Deepak, Jennifer Kroeger, Jason Mendez, Jared Nirenberg, Sarah Silberman, and Jackson Stiles. The group was assisted by graduate students James Eguchi, Damanveer Grewal, Hehe Jiang, Sriparna Saha, Chenliang Wu, and Dr. Ming Tang.

The Southern California region has a complex geologic past with subduction, rifting and strike-slip motion, occurring along the major plates underlying the North American Continent. Most of California’s Paleozoic geologic history is evident in regions of the Mojave Desert and Death Valley. The rocks here are primarily, are limestone with an abundance of fossils, that indicate the evolution of early marine life forms. The area saw multiple periods of sea level fluctuations that led to the deposition of carbonate reefs along the Death Valley region. The Paleozoic era saw deposition of limestones, sandstones, and shales that were later eroded, displaced or uplifted during the tectonic activity that followed in the Mesozoic and Cenozoic.

The Mesozoic was a period of high geologic activity. During the middle to late Jurassic period, the Farallon Plate began subducting under the North American Plate leading to the development of an extensive volcanic-arc system along the western coast of North America and the Rocky Mountains in the late Cretaceous. Subduction also led to the formation of the Southern California Batholith and other plutonic and extrusive volcanic regions in the Mojave Desert Region. An example of such Mesozoic plutonic rocks can be seen in the Joshua Tree National Park, where the relatively big exposed rocks depict uniformity in texture and sizes. The peak of volcanic activity, however, was during the late Cretaceous in the southern Sierra Nevada region. While the region was also covered by sedimentary deposits, the uplifting caused these deposits to be metamorphosed and intertwined with the volcanic deposits.

During the early Paleogene period while Farallon Plate subduction continued volcanic activity in the peninsular region ceased. During this period, uplift and erosion rates were identical which led to deposition of vast amounts of sediments along the western continental shelf. Moving into the early Neogene period, the Farallon Plate disappeared into the subduction zone forming the San Andreas Fault at an angle oblique to the western margin of the continent. As mountains began to rise along the coastline, marine sedimentary deposits were exposed. In the east, crustal thinning, and tectonic uplift in the Mojave regions led to the development of the basin and range landscape. Additionally, Baja California started to split from Mexico. In the quaternary period, the major driver of tectonic activity is the strike-slip San Andreas Fault, resulting in transverse ranges and extensional regions. Modern Rivers flowed through the basins while there was still volcanic activity in the Mojave region.

Day 1

The first stop of our trip was at Tourmaline Beach in La Jolla, California. We looked at the Point Loma Formation, which consists of marine deposits of sandstone and siltstone, formed originally in the Sierra Nevada- Peninsular Ranges batholith during the late Cretaceous. These were eroded from the roof of the magmatic arc that rose quickly due to compression and magmatism. Rapid erosion and transport of the deposits can be implied from the poorly rounded igneous sand grains. The marine deposits of forearc sandstones are tilted; graded-bedding and small areas of soft-sediment deformation are visible here.

Day 2

Marine depositional layers at Tourmaline Beach Photo Credit: Jackson Stiles

San Diego River Upper Estuary

 After a breakfast of bagels, the next morning we reached an overlook of the San Diego River. The river is slow moving, and while the water level was fairly low when we were there, due to its estuarine environment we could tell that we could tell that the water level is often much higher. The water here is brackish, and does not have strong enough sediment discharge to create a full delta and is mostly comprised of fine sands and silt.

Hospitality Point-San Diego River Mouth and Lower Estuary

 After stopping at the San Diego river overlook, we made our way out to see where the river meets the sea. While the San Diego River has migrated along the coast over time, it is now contained by a jetty, cementing its path into the ocean at this spot. The engineered jetty also prevents sediments, being carried along the shore from beaches by currents, from piling up in mission bay in favor of generating a large sandbar at the river channel. This piled up sediment is rarely breached by floods and suffers minimal erosion.

Sunset Cliffs Next, our group stopped at the cliffs overlooking the Pacific Ocean at Point Loma. These cliffs are an example of late Cretaceous sandstones (75ma) that have a high sand to mud ratio, making them fairly resistant to erosion. These sandstones belong to a forearc setting, exposed due to tectonic uplift, that enabled preservation and exposure of deep water sediments. Finely laminated layers at the bottom of the exposed strata are most likely the result of deposition in a calm depositional environment with high clay content. Overlying the thin laminated layers was a thicker layer of sandstone (indicating a much higher energy environment) and the white markings are erosional surfaces along the cliffs. Within this layer  large rip-up mud clasts were deposited. Further up in the outcrop we could see an old soil horizon and erosional unconformity that represents a 70 million year gap between the Cretaceous sediments and the more recently deposited sediments. We also identified sections of soft sediment deformation and local slumping from differential compaction of the overlying layers on the soft sediments. The entire outcrop was interlaced with faults.

Soft sediment deformation overlaying clay layers.  Photo Credit: Jackson Stiles

Coronado Overlook

 Our next stop was at the top of the Cabrillo National monument overlooking the San Diego Bay. The bay itself is a graben bound by faults and the Cretaceous mountains in the East. Coronado Island is a sand spit created by long-shore sediment pulses from the ocean. The sediment deposited on the coastal plains from the eastern mountains manifests into turbidites and deep water deposits.

Peninsular Ranges Batholith-Cretaceous Plutonic Rocks

 At this stop outside of San Diego, we parked on the roadside to look at a large outcropping in the Peninsular Ranges batholith region, which is around 90 million years old. In this road cut the majority of the rocks were tonalite (a type of felsic granodiorite mostly made of plagioclase). This tonalitic outcrop was crosscut by large dark colored (mafic) and light colored (silica-rich) dikes. The dikes intruded after the tonalite batholith had formed and the brittle nature of the tonalite led to the development of extensive fractures.

Cuyamaca Lake

 This spot is underlain by Cretaceous gabbro composed mainly of plagioclase and orthopyroxene that are associated with the Cretaceous arc. Olivine was also present in the samples, but it was difficult to identify. The rocks around Lake Cuyamaca are about 90 million years old and is unique given it is one of the only sites in all of Southern California with layered gabbro deposits.

Jurassic Migmatites

 To reach this stop we took a quick hike through some brushes. The stop was focused on an outcrop of rock within a plain. The rocks we observed were Paleozoic sediments that had been re-melted and deformed in the ductile regime. This could have occurred in the Mesozoic era by the melting of the sediments that underthrust in a subduction zone. During this process, many white felsic dikes formed through the rock structure, cross-cutting each other in several places. Within these dikes, we observed clusters of black coarse-grained tourmaline crystals and we could identify them as tourmaline pegmatites. Throughout the surface of the migmatites, there were small, unnatural depressions. which interestingly served as evidence that the outcrop was used by Native Americans to grind nuts.

View of Alluvial Fan
After leaving Julian (without having any of their famous apple pie), we stopped along the side of the road in a vast plain region surrounded by mountains. The region had a high quantity of brittle shear in fault gouges, and ductile shear seen in mylonite metamorphism resulting from high shear strain.The protomylonites from this intense ductile shear were quite prominent. The tonalite in this area was highly foliated, and there were a few dikes present. Alluvial fans observed here had a high gradient and contained many boulders and cobbles. The vast plain region was a large coalescence of alluvial fans-a feature that is known as a bajada.

Two cross-cutting dikes in the Jurassic Migmatites.  Photo Credit: Chenliang Wu

 At our next stop, we were greeted by a small shack with the words “dead body inside” crudely painted on it. The stop was located at the base of some mountains, with a view of a range across a playa. The mountains in the distance had reddish black sediment deposits along their hillsides. These were representative of fluvial sediments about 3 to 5 million years. The reddish black coating was likely a layer of iron-manganese oxide around 10 microns thick, and it indicates they were older than the incision. The rocks along the hillside we had stopped at were proto-mylonites. The shear stress during the mylonitization process caused various minerals in the rock to recrystallize that resulted in presence of clusters of garnet crystals forming throughout the matrix. The mylonitization was an inter-arc shear zone and most likely occurred during the late Cretaceous arc magmatism, and suggests a connection between the arc magmatism and a great amount of deformation of the upper plate.

Day 3

Salton Sea Area

 Our first stop on the third day was at the Salton Sea Pliocene deposits between the Salton Sea and the Gulf of California Basin. The deposits were fluvial, lake, and deltaic associated with the initiation of the rifting of the Gulf. We saw different surfaces, including tilted mudstones with sandstones on top of them. The canyon had large cobbles around the rim, likely transported there by large floods. Many of these cobbles were mylonites similar the ones we saw at the end of Day Two.

Our next stop was at the Salton Sea which is a landlocked water-body, formed as a result of northward extension of the Gulf of California, to accommodate the developing faults in the area. While the base of the Salton Sea is an oceanic-crust the water itself is not that deep (~10s of meters). Interestingly, the Salton Sea is about 234 feet below sea level. Over the last 100,000 years or so, the water level has been decreasing continually. The restricted size of the sea lead to conditions with no upwelling, and therefore there is no thermohaline circulation that caused the sea to stratify and there is a good amount of bioactivity in the top layers. Every once in awhile this circulation will start up, and many of the fish die. The sea is now fed by agricultural runoff.

Obsidian Butte Outcrop

 Here we had the chance to see what was left of a rhyolitic, Pleistocene lava flow that quenched to obsidian. Rocks layered with obsidian and pumice and xenoliths were interesting features at this outcrop. These features indicate that an initially volatile-rich magma was subjected to decrease in pressure which led to the formation of these layered obsidian-pumice flows. As the volatiles began to escape, the magma was left with little/no gas and it quenched eventually to form glassy obsidian. The escape of bubbles was in fact facilitated by their size. The smaller bubbles that could not escape eventually formed the pumice layers. We also evidence of shearing and slow stirring of the magma at the surface. The rhyolites indicate that this area tends to have a high heat flow and a thin crust.

Presence of mud-volcanoes in the area, further establish the dominance of a high geothermal gradient in this area. These mud volcanoes are interesting because they are constantly migrating.The mud-volcano flows are essentially like basaltic lava flows, that flow slowly, traveling over larger distances owing to their low viscosity. The tops of the volcanoes were spurting out mud and bubbling out CO2.

Box Canyon

Tilted sandstone layers.  Photo Credit: Jennifer Kroeger

At Box Canyon, we observed tilted sandstone layers from the Pliocene with some conglomerates in the layers. These sandstones were tilted as the Gulf of California subsided during rifting. We saw evidence of cross-bedding and several channels indicating that most likely they formed in a braided river system. There was high grain size variability is the sandstones and conglomerates, so the depositional environment was likely close to the source. Also, we noted that gypsum was later precipitated in the fractures in the sandstone after deposition. Rip-up mud clasts were also found in both the sandstone and conglomerate indicating a high energy environment.

Mecca Hills

 At Mecca Hills, we stopped on the side of the road to observe a large anticline on the side of one of the hills. The sediment layers were most likely around 3 million years old, while the anticline was due to younger, active tectonics.

Pelona schist

 We stopped along the side of a highway dodging speeding vehicles, to observe the Pelona Schist that formed as part of the accretionary complex as the Farallon plate was subducting during the late Cretaceous period. The schist here underwent greenschist-facies metamorphism as is evidenced by the abundance of chlorite, biotite, and muscovite minerals. The rocks sections were well foliated and weathered on the top.

Joshua Tree – Jumbo Rocks

  At Joshua Tree National Park, we observed the Jumbo Rocks that are coarse-grained granites formed in the Cretaceous and Jurassic eras. Interestingly, the rocks are extremely homogeneous in composition and grain size without much texture. The rocks are jointed, that likely formed while the pluton was cooling to release stress. The joints were filled by dikes that had a very similar composition to the surrounding rocks, though we observed less biotite in the dikes. These dikes are possibly the remains of the magma that formed the pluton that came back up later to fill the joints after the joints formed during cooling.

Palms Canyon Oasis The last stop of the day was at Palms Canyon Oasis, where we observed Jurassic quartz monzonites with grey feldspar megacrysts. Here we observed large, single crystal alkali feldspars that were prominently larger than the surrounding grains. While it is not well-established how these megacrysts form, it has been proposed that fluid transport aided in the growth of these large phases.

Day 4

Salt Deposits
At this stop, we walked out on evaporite deposits. The evaporites were seemingly most NaCl but presumably had some amount of lithium and calcium chloride as well. The deposition of these evaporites is aided by the topography of the area.


Wind created evaporite formation. Photo Credit: Jackson Stiles

The area is a local low: structurally a small graben bounded by faults and mountains on either side drain into it. Water draining from the surrounding mountains enrich the water in minerals that then form evaporite beds as the water accumulates and evaporates in the graben. We also saw several interesting structures in the evaporite deposits including hair like structures formed by wind, beautiful halite crystals, and thin layers of evaporite formed on the surface of bubbles of briny water.


Vesicular rocks. Photo Credit: Jackson Stiles

Amboy Crater
At Amboy Crater, we looked at a cinder cone volcano and the associated extensive basalt lava flow. The cinder cone and basalt lava flow formed in the Pleistocene and their young age is reflected by the characteristic shape of the cinder cone as weathering has not changed its form much yet.  The extensive basalt flows seen here flowed over much larger areas than the rhyolite flows we previously saw due to the basalt having less silicate in it which lowers the viscosity allowing the lava to flow further. We examined bombs and other debris shot out from the cinder cone during its formation, although we did not actually walk up to the cinder cone itself.

The flow and pyroclasts were quite vesiculated and several flow indicators like ridges and folds visible. The cinder cone itself formed as lava was spit out of the vent as opposed to the usual flowing lava that would create other types of volcanoes. The cinder cone is formed as lava cools quickly after being launched into the air and falls back to the ground creating the characteristic conical shape made up of pyroclastics.  

Dish Hill

 Dish Hill was another cinder cone volcano nearby; however, it was a few million years older. Due to weathering over its existence and due to mining for road fill, faces of this cinder cone had been dissected and allowed us to examine the interior portions of a cinder cone. The more extensive weathering and oxidation also gave Dish Hill a reddish color rather than Amboy Crater’s black color.

Olivines and pyroxenes from the mantle. Photo Credit: Chenliang Wu (L: peridotite xenolith) and Jackson Stiles (R: pyroxenes)

At this stop, we saw more bombs and pyroclasts, this time larger for the most part. The dissected side of the cinder cone gave us access deeper into the cone where we found many peridotite xenoliths brought up from the mantle. We also saw granitic xenoliths from the crust that were brought up from the walls of the magma chamber and vent. Common in the rocks were olivine and pyroxene xenoliths.

Kelso Dunes

These dunes make up the largest field of windblown sand deposits in the Mojave Desert. It is still an active region and includes migrating dunes, vegetation-stabilized dunes, sand sheets, and sand ramps. The grains are light-coloured which leads to the conclusion that the protoliths are quartz and feldspar. Taking a closer look at the grains reveal that they are fairly round and around 100 microns large. These sand grains most likely originate from the Mojave River sink (west of the dune’s location). We also observed that the ripples on the dunes indicated wind direction, with the shadowed ripple portions on the lee face towards the wind. The south side of the dunes also held more vegetation than the lee side.

Cima Volcanic Field

Interior of a lava tube. Photo Credit: Chenliang

This volcanic field is made up of alkali basalt cinder cones and lava flows. These are associated with the Basin and Range opening. Most of the lavas in this area are younger than 1 Ma. The lack of abrasion of the cinder cones and unweathered lava flows show the youth of these volcanoes. The lava tubes present in this field form when a low-viscosity lava flow develops a hard crust (due to cooling of surface lava) that acts as a roof allowing the lava beneath to sustain high temperatures and continue flowing. Within the tube, marks, called flow ledges/lines, on the wall indicate different levels at which the lava flowed. Additionally, lavacicles (stalactites) and drip stalagmites are clearly visible inside of the tube. These could form when lava splashes onto the roof of the tube and slowly oozes down. Mountain Pass Syenites

At this mountain pass, a carbonatite-syenite complex is seen that is approximately one billion years old. There is a mine nearby that is collecting the carbonatite for rare earth elements. Carbonatites are rare igneous rocks; three models to explain their formation exist. Carbonatites are usually associated with undersaturated (low silica) igneous rocks, and instead of being silica tetrahedral, the anions are carbonate complexes. This rock can form directly is by low-degree partial melts in the mantle and melt differentiation. Another way is through liquid immiscibility between a carbonate melt and a silicate melt. Finally, extreme crystal fractionation may saturate CO2 levels in the magma, leading to the formation of carbonatites. Fun fact!: Mountain Pass used to be the largest rare-earth element mine in the world until China discovered large deposits that currently produce 105,000 MT of rare earth minerals a year.

At this pass, we observed syenite (intrusive plutonic rock) with high amounts of orthoclase, along with some hornblende and biotite.

Day 5
Red Rock Canyon State Park

The reddish rocks are Jurassic age sandstones that represent fluvial, lacustrine, and Aeolian environments, most likely having formed in a shallow, continental sea. The sandstones are overlain by gray Cambrian limestones. A closer look revealed that below the Jurassic sandstones lay Permian sandstones. These actually formed from large dunes, resulting in cross-cutting beds and dipping in a massive scale.

Aeolian Jurassic dunes. Photo Credit: Jackson Stiles

The late Cretaceous-early Tertiary back arc thrusting resulted in an inverted sedimentary sequence where older rocks are underlain by younger rocks during a retro-arc thrust event where the Farallon oceanic plate was being subducted beneath the North American plate.


ESCI 322 Field Trip: Mysterious Visitors from the Deep


Photo credit: Hehe Jiang

This blog describes the 3-day field trip that the Fall 2015 ESCI 322 class took to northern California with Professors Cin-Ty Lee & Rajdeep Dasgupta and TA Laura Carter, as told by the undergraduate students: Sofia Avendano, Anthony Foster, Alexandra Homes, Garrett Lynch, Oliver Lucier, Ian Mellor-Crummey, Leila Wahab, Shannon Wang, and Sam Zapp.

Day 1:

Marin Headlands (chert):


Garrett Lynch in front of deformed cherts

This site overlooked San Francisco Bay directly across the Golden Gate Bridge. During the Jurassic period, following Pangaea, the Farallon plate subducted underneath the western North American plate.

At this stop we saw silica-rich cherts on top of ancient oceanic crust. The cherts were once laminated sedimentary deposits formed from diatoms and during subduction were scraped off as part of the accretionary prism. These specific cherts formed near the equator, probably during the Jurassic era. In composition, these cherts are 99% silica, but also contain some iron and manganese. This composition arose as iron and manganese were dispelled from the mid-oceanic ridges and deposited within the silicic ooze that becomes chert. We also noticed fractures filled with quartz in the form of white veins. Over to the right we saw darker, older, green bands, which had not been oxidized.

Marin Headlands (pillow basalts):


Students Oliver Lucier and Sam Zapp looking at a pillow basalt outcrop with Garrett Lynch and Alexandra Holmes looking on from above and TA Laura Carter from below.

The pillow basalts here formed from magma that upwelled due to the divergent boundary at the mid-ocean ridge and was erupted underwater. Zoned phenocrysts of plagioclase feldspar were visible, indicating that they grew intrusively before eruption. The surrounding fine grained matrix was extruded on the seafloor where it cooled quickly. The edge of each pillow featured a glassy rind where the surface of the lava body cooled even quicker with direct contact with the water. Layers of chert were deposited on top of these pillows in a marine setting.


Professor Dasgupta discussing pillow basalts with the students









Tiburon Peninsula (Eclogite, blueschist, and peridotite, boulder outcrops):


Eclogite. Photo credit: Prof Cin-Ty Lee

Here we saw a number of boulder outcrops. Eclogite needs high pressure and high temperature conditions to form, so its presence was indicative of subduction zone setting. Chemically, it is very similar to the pillow basalts we saw earlier at the Marin Headlands, suggesting this may be the protolith. However, the eclogite samples we saw were also enriched in sodium, probably from hydrothermal processes, giving a special form of pyroxene: jadeite. In eclogite, the aluminum in the protolith plagioclase is now held in garnet. As it moved back up through the crust, some of the eclogite retrograded into blueschist, greenschist and amphibolite. The heterogeneity of the metamorphic grade may have been caused by uneven distribution of fluids. The kinetics of retrograde metamorphism can be slow, but the presence of fluids makes retrograde metamorphism occur faster.



Students looking at a peridotite xenolith


The last outcrop we saw here was composed of peridotite. It contained orthopyroxene and olivine, so it would be classified as harzburgite. Peridotites with a much greater amount of orthopyroxene are lherzolite. These peridotite xenoliths had a slightly brown / tan coloring due to the weathering at the Earth’s surface. We also saw some serpentinite—altered peridotite—in the area.




Bolinas Lagoon (San Andreas fault, SEALS!):

We observed a rookery of seals accompanied by a lone sea lion as if he meant, through his presence, to elicit an ironical play upon a Danish children’s story. Abreast of these seals, two shovelers swam, feeding, and one merganser swooped through, low, tantalizing the water.

Point Reyes Visitor Center / Earthquake Museum:

Here we did a short nature walk travelling along the path of the San Andreas fault. We saw a fence that was displaced several feet due to previous movement along the fault, which is evidence of an ongoing right lateral strike slip fault.

The beach, the cliffs:


Students looking at an unconformity on the beach at Point Reyes. Photo credit: Laura Carter

Along Point Reyes on the Pacific Ocean there was a series of cliffs with igneous outcrops that were the roots of a magma chamber from the Cretaceous next to marine sediments from the Miocene, representing a large unconformity. Here, we could see cross cutting relations in the igneous outcrops where magmas of different compositions interacted. The parental magmas were more basaltic, while the more felsic magmas were much more evolved. The intruding felsic magmas were much more viscous, so they mixed in some places but stayed clearly separate in others, and then froze in place. Mixing of the magmas indicated that the surrounding rock was still magmatic mush when they mingled.

Sharper boundaries between two magmas is also visible. This was likely due to the fact that basalt has a higher melting point, so when it cooled, it contracted and pulled some of the surrounding liquid in. These intrusions occurred further inland from the subduction zone, around 10 km below the surface.

Day 2:

Sedimentary Road Cuts, Ione Formation:

In the foothills of the Sierra Nevada, we saw an outcrop on the exposed shoulder of a highway. Sediments had been collected from the Sierra Nevadas and compacted into layers. The layers originated from granodiorite which lost much of its magnesium and iron, leaving behind what became predominantly kaolinite (Al2SiO5). The lower layers of laminated deltaic sediment gave way to cross-bedding features as a fluvial system moved through the area. At the edges of the formation, there was evidence of soft sediment deformation.

Silver Lake:

We also stopped at Silver Lake for lunch. Beside the lake there were these interesting boulders which appeared to contain clasts of petrified wood. Across the lake we saw large lava flows of andesitic magma, now part of an imposing mountainside.


Andesitic lava flows overlooking Silver Lake. Photo credit: Prof Cin-Ty Lee

Mono Lake:

The edge of Mono Lake contains massive collections of tufa deposited in towers. We learned that these tufa deposits are a result of the very alkaline water from the lake mixing with calcium rich spring water from the Sierras, which precipitates calcium carbonate (CaCO3). The tufa deposits become visible and form large columns due to the water level of Mono Lake lowering over time. In the past, the springs feeding Mono Lake were drained to provide water for places like Los Angeles and other urban areas, which made more and more of the tufa deposits visible. Only in recent years has this been slowed and Mono Lake protected.


Tufa towers at Mono Lake. Photo credit: Ian Mellor-Crummey

Day 3:

Long Valley Caldera:

The Long Valley Caldera is in the Basin and Range region, which underwent extension. The Caldera was active 2 million years ago, but the last eruption occurred 700,000 years ago and erupted 700,000 m3 of rhyolite. The eruption style was Plinian, which is very explosive, caused by magma fragmentation, and characterized by fine ash. The ash of the eruption spread throughout the western US. There were also resurgent domes with the same magma composition, but with effusive style eruptions since the magmas had already been degassed.

The youngest lava flows were 7,000 years old.  Under the Basin and Range extension, decompression allows the mantle to cross the solidus, which leads to alkalic basaltic magmatism. Basalts that re-melt the crust fractionate and form rhyolites, so there are both extremes here: basalts and rhyolites. It is still unclear how basalts skip to rhyolites with no intermediate composition.


Glacial moraine in front of the Sierra Nevadas on the edge of Long Valley Caldera

The actual magma body was 10 km below the surface. The magma body builds up pressure, creating fractures, and, when the pressure exceeds the yield stress of the rock above, the system evacuates and the roof collapses. This has left a low, flat ~10 x 20 km area. Fumaroles, where magmatic gases were still escaping due to residual heat, were also visible.

Around the caldera, there were also moraines, large sediment mounds moved by glaciation, visible along the outskirts in front of the Sierras.


Long Valley ignimbrite deposit at Owen’s Gorge. Photo credit: Prof Cin-Ty Lee

Owen’s Gorge:


Long Valley ignimbrite containing pink pumice and granitic lithics

At the base of the gorge, we saw evidence of a huge rhyolitic ignimbrite, which must have erupted over an incredibly short period of time (estimated at around 6 days). There were three different layers denoting sequential eruptions. The lowest layer was more porous, with many lateral fractures and no evidence of compaction, which indicates that the lowest layer cooled before the weight of the next eruption could deform it. The texture of this tuff was friable, easily breakable, and it was more silicic than the upper layers. The first layer was probably an initial pulse of small eruptions right before the large eruption. Weak precursor eruptions tend to have ashfall rates slower than cooling rates.
The middle layer had a very clear fabric with small pumice ejecta elongated and oriented in the same direction, which shows that the layer was compacted. Thus it cooled slower than the layer below. The strain of the rock can be found from the aspect ratio of the elongated clasts, perpendicular to the bedding. This layer was welded ignimbrite, which contained fiamme, and was formed under high temperature and pressure. Jointing occurred after cooling due to contraction.


Long Valley ignimbrite containing pink pumice and granitic lithics


The upper layer was mostly ash with pre-existing metamorphic, Paleozoic clasts caught in the ash (lithics). There were also pink pumice clasts that also have an individual fabric, which probably came from a different eruption, and had elongated vesicles caused by compaction. There was no larger scale fabric because there was not enough overpressure to deform the material, so the last eruption must have cooled quickly.





Panum Crater:


Flow textures in banded obsidian layers

Panum Crater is what remains of a rhyolitic plug-dome volcano. Volcanic eruptions in this area began around 40,000 years ago. Panum Crater itself is approximately dated at 650 years old and is the youngest in the area. The explosion occurred as a magma bubble heated the water table into instant, high-pressure steam. Pumice was the first to be expelled from the volcano, and deposited around the outside of the crater. Following, breccia formed a dome over the crater, followed by lava flows that cooled to obsidian, which dominate the landscape.


Vesicles in the pumice at Panum Crater. Car keys for scale. Photo credit: Prof Raj Dasgupta


Highly zoomed image of the vesicle walls in the Panum Crater flows. Photo credit: Prof Cin-Ty Lee

The rhyolitic eruptions in the crater produced very silicic lava (roughly 76% SiO2), which is highly viscous and created the two main types of rock we saw: pumice and obsidian. The pumice was very low in density and highly vesicular. The vesicles formed from trapped air bubbles, indicating that the lava solidified quickly. Obsidian had little to no bubbles, but is the same composition as pumice. The obsidian cools quickly forming a glass, evidenced by the black rock’s conchoidal fracturing we saw.

A curious sample of rock we found looked like obsidian but had what looked like mud cracks on its surface. This was actually a breadcrust bomb formed from molten lava chunks flung into the air. The outer surface cooled rapidly, but the inside was still molten, so the gases inside continued expanding. This cracked the surface of the rock, causing it to look like the crust of a bread loaf.

Geologically speaking, obsidian never lasts very long. Devitrification causes glass to be more like rock and less like glass, so It is difficult to find glassy obsidian older than 10 thousand years old. The more vesicular the obsidian is, the faster the rate of devitrification since water gets in the vesicles. Thus, the rock samples at Panum were much younger than the samples at other formations we studied.

Basaltic Phreatic Deposit:


Deformation and bedded phreatic ash deposits with Alexandra Homes for scale

On our way from Panum Crater, we stopped to examine an omega-shaped formation on the side of the road. Upon close inspection, we found the rock to be very fine-grained and soft, with cross-bedding evident on the folds. This was formed when a basaltic flow erupted underwater. When basalt hits groundwater, it fragments and becomes very, very fine-grained, creating the soft texture that we observed instead of the texture we saw in previous basalt deposits. The deformation is very similar to soft-sediment deformation, and most likely occurred when the rock was still warm and ductile. Cross-bedding was likely a result of basaltic ash settling in bodies of water nearby, creating the sloped deformation, and cross-bedding typical of river systems.